background image

PAGE         

7

  

Section 2  

  Connecting the System

2.1  System Requirements

1.

 The S6.2 Controller.

2. 

A stereo power amplifier for each pair of 

speakers connected to a zone. This should 
be located close to the S6.2 Controller.

3.

 Each Zone will require a control keypad 

from the following range. 

• KPM7

• LKPM7

• Monochrome touch screen keypad 

• Colour touch screen keypad

• Wireless touch screen keypad

It is possible to combine wireless touch 
screen control with one of any other wall 
mounted control keypad.

4. Speakers in each Zone.

5. Audio sources located by the S6.2 

Controller such as:

• 

Systemline Audio Server

• 

Blu-ray Player

• 

Arcam DAB radio tuner

6.

 Ethernet connection to the house network 

using the RJ45 Ethernet socket.

7.

 Optional local audio system connected to 

a CIM/WE or CIM/PI2, most commonly the 
TV audio.

8.

 Optional Lighting control system 

connected to one of the available RS232 
ports such as Lutron Grafik-eye or Lutron 
Homeworks.

9.

 Optional iPod dock system such as the 

Sonance iPort which is connected to one of 
the available RS232 ports.

10.

 Optional video distribution system 

connected to the Video RS232 control port 

such as the Armour 4x8 HDMI matrix or the 

Kramer VP-88ETH component matrix switch 

11. 

Cables as required.

The following accessories are included with 
the S6.2 Controller:

•1 Systemline LRN7 Learning Remote  

 Control

•8 SAIC Audio interconnects

•4 SL-WE IR window emitters

•2 SL-TE twin IR window emitters

•1 Mains cable, UK ad Euro types

•1 630mA fuse (for 230/240V)

•3 RS232 Null Modem cables

•3 RS232 Straight through cables

•1 Ethernet Patch Cable

•1 Software CD-ROM

•1 User Guide

•1 Installation Guide

Not Included with the S6.2 Controller are the 
following accessories that may be necessary 
in certain Installations:-

• USA/Canadian power cable

• RS232 cables if more than one type is  

 required

• SL-WE or ST-TE window emitters if more  

  IR source control is required

• CAT5e cables and connectors

During installation you will also require a PC 
or laptop PC running Microsoft Windows 
2000 or higher.

All of the provided software should be taken 

to site, but you should check for updates 
before each installation at http://www.
armourhe.co.uk/downloads/-software/
systemnet_files

Note:

 Always read and comply with the 

manufacturer’s instructions supplied with any 
piece of equipment that is part of an S6.2 
Controller installation.

2  Connecting the S6.2 Controller in a 

System

A distributed audio system based around an S6.2 Controller will require a 
selection from the following items:

Summary of Contents for S6.2

























Reviews: