Synthes TFN Technique Manual Download Page 57 | Manualshive

Page: 57 / 84

background image

Locking mechanism
disengaged

Locking mechanism
engaged

Nail

Lock drive

Lock prong

Head element

Locking Mechanism Assembly

There is no need to remove the preassembled locking mech-
anism from the nail. If the locking mechanism is removed, it
can be reassembled by following the steps below. The lock-
ing mechanism consists of two parts: the lock drive and the
lock prong. The lock prong fills the void made by the flat
on the head element, controlling the rotation of the head
element. The lock drive advances and retracts the lock prong.

Steps for assembly

1 Slide the lip of the lock drive into the mating groove on

the lock prong, forming one assembly.

2 Align the two lobes on the lock prong with the channels

in the proximal end of the nail. The lobes are asymmetrical
and will only fit into the nail in one orientation.

3 Drop the lock drive and lock prong, as one piece, into the

top of the nail.

4 Place the head element through the hole in the nail

with the flat facing the distal end of the nail and use the
5.0 mm flexible hexagonal screwdriver to advance
the locking mechanism until it touches the head element.

5 Back the locking mechanism off the head element by

turning the screwdriver in a counterclockwise direction
one full turn, and remove the head element.

The nail is now ready for insertion.

TFN – Titanium Trochanteric Fixation Nail System

Technique Guide

Synthes

55

«
...
55
56
57
58
59
...
»

Summary of Contents for TFN





















































































Reviews:

No comments

Related manuals for TFN

Brand: FENDT Pages: 31

Brand: Parkside Pages: 58

Brand: RAMVAC Pages: 53

PulseDose LT PD1000

Brand: DeVilbiss Pages: 58

Brand: Eleiko Pages: 4

Brand: Heiniger Pages: 164

Brand: Hausmann Pages: 10

Brand: ASIA TECHNOLOGY Pages: 38

Brand: Game Winner Pages: 25

Brand: Anslut Pages: 20

Brand: Halemeier Pages: 2

Brand: IRUDEK Pages: 19

Brand: J.P. SELECTA Pages: 40

Brand: Vibrapower HIIT Pages: 24

ORTHODONTIC CHAIR

Brand: DCI Edge Pages: 16

Brand: Magnum Industrial Pages: 9

Brand: P.Lindberg Pages: 26

Brand: wittek Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands