Synthes TFN Technique Manual Download Page 7

Page: 7 / 84

1000

10,000

100,000 1,000,000 10,000,000

4.5 (1011 lbs)

4.0 (899 lbs)

3.5 (787 lbs)

3.0 (674 lbs)

2.5 (562 lbs)

2.0 (449 lbs)

1.5 (337 lbs)

1.0 (225 lbs)

0.5 (112 lbs)

TFN

Test conducted at Legacy Research and Technology Center, Portland, OR.

Test conducted at Synthes Mechanical Testing Lab, West Chester, PA.

The 11.0 mm helical blade reduces amount of bone
removed

By using the 11.0 mm helical blade, significantly less bone is
removed than with a predrilled lag screw.

The helical blade compacts trabecular bone around the blade
as it advances into the femoral head.

Note:

The amount of bone removed by an implant is directly

related to its cross-sectional area. The helical blade’s cross-
sectional area is only 38% that of a standard lag screw.

Longer fatigue life in mechanical testing

Example of bone removal
with standard lag screw

Example of bone removal
with helical blade

[

(

]

Fatigue life

Cycles

IM Device
with Lag Screw

TFN – Titanium Trochanteric Fixation Nail System

Technique Guide

Synthes

Summary of Contents for TFN





















































































Search results

Summary of Contents for TFN

Reviews:

Related manuals for TFN

Brands by name

Popular brands

Synthes TFN, Technique Manual

Search results

Summary of Contents for TFN

Reviews:

Related manuals for TFN

Brands by name

Popular brands