Synthes TFN Technique Manual Download Page 45

Page: 45 / 84

Insert locking bolt

Instruments

314.110 Holding Sleeve, large

314.750 Screwdriver, hexagonal, large,

3.5 mm,

with Groove, length 280 mm

321.200 Ratchet Wrench for Nut, hexagonal,

11.0 mm

357.398 Shaft, hexagonal

8.0 mm, cannulated,

short, length 125 mm

357.515 Screwdriver, hexagonal,

with spherical head

8.0 mm

360.253 Locking Device for Holding Sleeve

No. 314.110

Insert the appropriate length 4.9 mm locking bolt using the
hexagonal screwdriver, holding sleeve, and holding sleeve
locking device.

Note:

The insertion depth of the nail is indicated by the rings

on the insertion handle. This will help in end cap selection.
Remove the connecting screw and insertion handle using the
ball hexagonal screwdriver or the cannulated shaft and
ratchet wrench.

Standard freehand technique

Instrument

315.400 Drill Bit

4.0 mm, length 195/170 mm,

3-flute, for Quick Coupling

Use the 4.0 mm three-fluted drill bit to perform freehand
distal locking.

TFN – Titanium Trochanteric Fixation Nail System

Technique Guide

Synthes

Summary of Contents for TFN





















































































Search results

Summary of Contents for TFN

Reviews:

Related manuals for TFN

Brands by name

Popular brands

Synthes TFN, Technique Manual

Search results

Summary of Contents for TFN

Reviews:

Related manuals for TFN

Brands by name

Popular brands