Section V
Control Interface Details
006-0006885 08/14/18
Rev H
39 of 48
MINV-4000-1U-28 Guide www.synqor.com
Sleep Mode
The SynQor MINV-4000 features a user-configurable sleep mode option. Enabled by default, the sleep
mode allows the system to enter an extremely low-power state while powered from the DC INPUT.
The sleep mode forces the system to disable all internal circuitry after being in the standby
state for one minute. Additionally, upon initial application of DC INPUT power, the system will
enter the sleep state.
While in the sleep state, the total system input current will be reduced to less than 500 uA. In
order to wake the system, the front panel switch needs to be held in the UP position.
To disable the sleep mode, the
SLEEP DISABLE
command must be transmitted. The sleep mode
can be re-enabled by transmitting the
SLEEP ENABLE
command.
