006-0006885 08/14/18
Rev H
33 of 48
MINV-4000-1U-28 Guide www.synqor.com
Section V
Control Interface Details
Control Cable Connections
There are two high-density (three-row) DB15 connectors located on the rear panel of the MINV:
The User I/O female DB15 connector on the left is for an optional connection to a host/system
computer so that it can control the MINV and receive information regarding the status of the MINV.
The Configuration male DB15 connector on the right provides for synchronized startup and
shutdown operation of multiple interconnected units. See the “Possible configurations of the AC
OUTPUTs” on page page 25 for supported configurations and the “Synchronized Operation of
Multiple Units” on page page 38 for details.
The designation/location of the pins for the User I/O female high-density DB15 connector is
shown below:
