006-0006885 08/14/18
Rev H
6 of 48
MINV-4000-1U-28 Guide www.synqor.com
Section II
General Product Information
Product Description
SynQor’s Military Inverter units are designed for the extreme environmental and demanding
electrical conditions of Military/Aerospace applications. SynQor’s MINV incorporates field
proven high efficiency designs and rugged packaging technologies. This MINV will accept a DC
input voltage while delivering a well-conditioned continuous 4000 W, AC output to the load. It
is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military
standards. Options include a selection of output voltage amplitudes, frequencies, and an
electronic breaker on the AC output to permit fault-tolerant parallel operation for higher power
and/or N+M redundant systems.
A communication/control port is available to permit monitoring and control by a host computer
system. Front panel LEDs provide information on the status of the MINV.
The electronic circuitry within the MINV-4000 Series products is designed, qualified and
screened according to SynQor’s MIL-COTS Standards. It complies with the requirements of
MIL-STD-704F, MIL-STD-1399-300B, MIL-STD-1275D and MIL-STD-461F, as well as IEC-EN61000
specifications for world-wide commercial utility applications.
The MINV-4000 Series products are designed and manufactured to withstand the harsh
environments and use encountered in military applications. The electronic circuitry is contained
in a sealed chamber constructed from a die-cast aluminum chassis that is weather-proof and
shock-proof. Redundant, water-proof fans on the rear panel draw cooling air over the heat-sink
fins below the sealed chamber. Military-grade circular connectors are used, and optional attached
connector covers are available for when the cables are not attached. The MINV-4000 Series products
comply with a wide range of testing according to MIL-STD-810G.
The SynQor MINV-4000 Series products are designed and manufactured in the U.S.A.
