Section II
General Product Information
006-0006885 08/14/18
Rev H
11 of 48
MINV-4000-1U-28 Guide www.synqor.com
Technical Specifications
DC INPUT CHARACTERISTICS
Steady State Operating Voltage
20 - 33 V
Continuous Maximum Input Current
240 A (full load, 20 V)
Transient Operating Voltage
18 - 40 V (500ms @ 18 V)
Transient Maximum Input Current
275 A
AC OUTPUT CHARACTERISTICS
Total Output Power Continuous
4000 W (5000 VA)
AC Output Waveform
Pure Sinusoidal
Voltage Line-Neutral
115 Vrms ± 3%
230 Vrms ± 3%
Frequency
60 Hz ± 0.5%
50 Hz ± 0.5%
400 Hz ± 0.5%
Load Power Factor
0-1.0 (leading or lagging)
Total Harmonic Distortion
2% (3000 W resistive load)
Single-Phase Output
Steady State Load Current
43.5 Arms (115 Vrms)
21.7 Arms (230 Vrms)
Peak Load Current
78 Apk (115 Vrms)
39 Apk (230 Vrms)
Specifications subject to change without notice.
* Regarding MIL-STD-461 CE-101, the 50 uH series inductance of a standard LISN
adversely affects the input ripple of the MINV. Such a large series
source inductance (50 uH in each power lead) is not generally encountered in a
28 V DC source of such high power rating. Therefore, testing for CE-101 (DC input)
was conducted with 3 different configurations: two using 50 uH LISNs and a 54 mF
capacitor connected across the input to the MINV, and one using 5 uH LISNs for
which no additional capacitor was added.
These configurations all passed CE-101 for all frequencies.
ENVIRONMENTAL CHARACTERISTICS MIL-STD-810G
Temperature Methods 501.5, 502.5
Operating Temperature
Full Rated Power
-40 °C — +55 °C
Reduced Power per Figure B
-40 °C — +70 °C
Storage Temperature
-40 °C — +70 °C
Altitude Method 500.5
Operating
0 - 18,000 ft
Non-operating
0 - 40,000 ft
Environmental Tests
Shock/Drop
Method 516.6, Procedures 1,4,6
Temperature Shock
Method 503.5, Procedure 1
Vibration
Method 514.6, CAT 5, 7, 8, 9, 24
Fungus
Method 508.6
Salt Fog
Method 509.5
Sand and Dust
Method 510.5, Procedures 1,2
Rain
Method 506.5 Procedure 1
Humidity
Method 507.5 Procedure 2
Mechanical Vibrations of
Method 528 Procedure 1
Shipboard Equipment
RELIABILITY CHARACTERISTICS MIL-HDBK-217F
MTBF 468 kHrs
MIL-217F Ground Benign, Ta=25 °C
ELECTROMAGNETIC CAPABILITY MIL-STD-461F
CE101*
30 Hz - 10 kHz
CE102
10 kHz - 10 MHz
CS101
30 Hz - 150 kHz
CS106
10 kHz - 40 GHz
CS114
10 kHz - 200 MHz
CS116
10 kHz - 100 MHz
RE101
30 Hz - 100 kHz
RE102
10 kHz - 18 GHz
RS101
30 Hz - 100 kHz
RS103
2 MHz - 40 GHz
MECHANICAL CHARACTERISTICS
1U Standard Chassis
Chassis Size (W x D x H)
17.00 ”W x 22.43 ”D x 1.73 “(1U)H
Case Material
Aluminum
Total Weight
32 lbs.
DC Input Connectors
DC (-) Input Connector
CGE2E18H5ZWB-16
DC (+) Input Connector
CGE2E18H5ZNB-16
AC Output Connectors
115 V Single Phase
CB2-20-19SXS
230 V Single Phase
CB2-20-19SXS
I/O Ports
User I/O Ports
HD DB15 Female
Configuration I/O Port
HD DB15 Male
Ethernet Port
Amphenol RJF22N00, Code B
Cooling Exhaust Fans
Sound Pressure Level (SPL)
64 dB(A)
Air Flow
0.92 (m
3
/min) 32.5 CFM
Two fans in system, above specs are for each fan separately.
MINV in Transit Case Option
