SynQor MINV-4000-1U-28 Series, Operator'S Manual

Page: 9 / 48

Section II General Product Information
006-0006885 08/14/18 Rev H 9 of 48 MINV-4000-1U-28 Guide www.synqor.com
Part Numbering Scheme and Options
This table shows the part numbering scheme for the full line of SynQor MINV products:
Base Models
Model Number Power Nominal DC Input Voltage Height (W x D x H) Weight
MINV-4000-1U 4000 W 5000 VA 28 V 1U (17.00” x 22.43” x 1.73”) 32 lbs.
Base Models
Options Options
DC Input
Voltage
AC
Output
Voltage
AC
Output
Neutral
Wire
AC
Output
Set Point
Freq
Output
Config
Additional
Options
DC Input
Voltage
28 20 - 33 V
AC Output
Voltage
1
2
115 Vrms
230 Vrms
28
1
2
G 5
-E
00
CE
MINV-4000-1U- F 6 S
AC Output
Neutral
Wire
G Grounded
R 4 F Floating*
R AC Output Electronic Breaker*
Not all combinations make valid part numbers, please contact SynQor for availability.
AC Output
Set Point
Freq
5
6
4
50 Hz
60 Hz
400 Hz
See the Product Summary web page for more options.
*Notes:
Order “F: Floating” option when configuring the AC output for multi-unit combinations
Output
Config
S Single-Phase Output
of up to 3 units.
Order “R: AC Output Electronic Breaker” option for fault-tolerant,
Additional
Options
-E Ethernet/SNMP with Configuration Loading
glitch-free parallel systems of up to 32 units with N+M redundancy. 00 No CE Marking
The AC output neutral wire will not be connected to the chassis.
CE CE Marking
Requires Ethernet / SNMP Option.
Examples:
MINV-4000-1U-28-1G6S-E00
MINV-4000-1U-28-2G5S-ECE (230 V output with CE marking)
The MINV-4000 Series of products provide up to 4000 W of total AC output power.
• A 1U high, 32 lbs. rackmount unit.
Each format has various options that can be specified according to the part numbering scheme
shown in the table:
• The AC OUTPUT voltage of the MINV-4000 series can be 115 Vrms or 230 Vrms.
• The AC OUTPUT can be configured with its neutral wire intentionally grounded to the chassis of
the MINV or left floating for shipboard or paralleling applications of up to 32 units.
• The initial set-point frequency of the AC OUTPUT voltage can be 50 Hz, 60 Hz, or 400 Hz. Regardless
of the initial set-point frequency, the actual frequency can be set through the communications/
control port.
• The Electronic Breaker option adds fault-tolerant, glitch-free multi-unit operation for N+1 or
N+M redundancy up to 32 units. This option allows up to 32 units total in Single Phase, Split
Phase, or 3-Phase systems.
• RS232 serial port and logic-level I/O communication are included in the standard model. An
Ethernet port provides web and SNMP interfaces.