12713140-003-2 Revision E.01 – January 2007
SSU-2000e Technical Reference 141
Chapter 2 TL1 Reference
Set NTP Parameters
Set NTP Parameters
This command sets the NTP client and NTP broadcast mode of operation.
Syntax
SET-PRMTR-NTP:[tid]::ctag::mode,ip,interval,prefer;
Related Commands
Parameter
Format
Description
mode
CLIENT |
BCLIENT |
BROADCAST |
DEL |
CLRALL
Sets the mode of operation, where:
Client
mode requests the time from the time server
(specified by
ip
); this time sets the time in the SSU.
Bclient
mode accepts time from a broadcast
server specified by
ip
.
Broadcast
mode configures the SSU as a
broadcast time server at the specified ip, the
broadcast
interval
(in seconds) defines the rate at
which the time will be broadcast by the server.
The
del
mode
deletes the server specified by
ip
from the list of peers; up to three ip’s can be
assigned for all peer modes combined.
Clrall
deletes all peer addresses. If three ip’s have
been defined and a fourth ip is defined, the system
returns a DENY message; you must delete one of
the existing ip’s prior to adding the new ip.
ip
Sets the IP address of the NTP server.
interval
Sets the rate (in seconds) at which the time is to be
broadcast by the server.
prefer
GPS |
CLIENT
Selects the time-of-day source in the SSU from GPS or
an NTP client.