manualshive.com logo in svg

Symmetricom SDU-2000e, Technical Reference, Page: 140 / 354

Share
Download
Symmetricom SDU-2000e Technical Reference Download Page 140

Chapter 2 TL1 Reference
Set Name

140

 

SSU-2000e Technical Reference

12713140-003-2  Revision E.01 – January 2007

Set Name

This command assigns a new name to the unit when you set the aid to S1A2 
(Communications Module) or omit the aid. The tid (if used) must match the original 
name, which is returned in the response sid. The new unit name must be used as 
the tid (and sid) for all commands following.

When you set the aid that designates an Input or Output port, the name is assigned 
to the port. The name for unit or port may be null or as many as 20 characters 
beginning with a letter. 

Syntax

SET-NAME:[tid]:[aid]:ctag:: name; 

Related Commands

Retrieve Name

, on page 80

Parameter

Format

Description

aid

S1A2

Sets the name of the shelf to the value in [name]

SxAy[-z]

Sets the specified module [or port] to the name specified 
in [name]

name

up to 20 

characters

Defines the name for the device specified in [aid]

Summary of Contents for SDU-2000e



































































































































































































































































































































































Reviews:

No comments