manualshive.com logo in svg

Symmetricom SDU-2000e, Technical Reference, Page: 218 / 354

Share
Download
Symmetricom SDU-2000e Technical Reference Download Page 218

Chapter 3 ICS Command Reference

RESTART

218

 

SSU-2000e Technical Reference

12713140-003-2  Revision E.01 – January 2007

RESTART

Use this command to restart the software for a specified module.

Level 0

Not applicable

Level 1

Not applicable

Level 2

Not applicable

Level 3

RESTART [xAy]

Use this command to restart the specified module. The command 
requires a valid module address. 

This command requires the whole entry RESTART to be entered to 
verify that you want to restart the module. This command requires a 
confirmation (YES | NO). If confirmation fails, no action is required.

Level 4

Same as Level 3 operation

Remarks None

Related

None

RestrictionsThis command is based on the target modules that have the SPI 

software RESTART command support. This command assumes that the 
target module is working properly. If the target module does not work, 
this command has no effect.

Note:

 This command does not work on the Buffer module.

Summary of Contents for SDU-2000e



































































































































































































































































































































































Reviews:

No comments