manualshive.com logo in svg

Symmetricom SDU-2000e, Technical Reference, Page: 119 / 354

Share
Download
Symmetricom SDU-2000e Technical Reference Download Page 119

12713140-003-2  Revision E.01 – January 2007

SSU-2000e Technical Reference 119

Chapter 2 TL1 Reference

Set Alarm Elevation Time Parameters

Set Alarm Elevation Time Parameters

This command sets the time for alarm elevation, from 60 seconds to 500,000 
seconds. A setting of 0 (zero) means no elevation for the alarm. When an alarm has 
been at MINOR or MAJOR level continuously for ELTIME seconds, then it is 
elevated to the next level. 

ELTIME may be set for each module or ALL modules, and applies to all alarms 
created by the module.

Syntax

SET-PRMTR-ELTIME:[tid]:[aid]:ctag::elevtime;

Related Commands

Retrieve Alarm Elevation Time

, on page 37

Parameter

Format

Description

aid

ALL

Sets the parameters for all modules.

SxAy

Sets the parameters for the specfied module.

elevtime

0 | 60 - 

500000

Sets the time after which an alarm is elevated to the next 
severity level.

Summary of Contents for SDU-2000e



































































































































































































































































































































































Reviews:

No comments