manualshive.com logo in svg

Symmetricom SDU-2000e, Technical Reference

Share
Download
Symmetricom SDU-2000e Technical Reference Download Page 219

12713140-003-2  Revision E.01 – January 2007

SSU-2000e Technical Reference 219

Chapter 3 ICS Command Reference

SECURITY

SECURITY

This command provides the security interface to the SSU-2000e. This command 
works with the 

USERS

 command to allow an Administrator-level user to change 

passwords, to query the security log, set the login failed attempts threshold, set the 
user lockout timer, and set the password aging timer.

Level 0:

NA

Level 1:

NA

Level 2:

NA

Level 3:

NA

Level 4:

SECURITY

SECURITY LOG {count}

SECURITY FAIL {DISABLE|2-5}

SECURITY LOCKOUT {10-86400}

SECURITY AGING {0|{10-360}}

If you do not specify parameters in the command, the current security 
settings display.

The options are:

LOG

Sets the specified number (count) of the latest security 
entries to display. If no count is specified, it displays the 
latest one. The count is up to the max resource of the 
COMM Module in the NVRAM. If it is too big, the command 
automatically adjusts the number to its own maximum.

FAIL

Sets the login failed attempt threshold. The range is 2 to 5. 
The default is 0 (i.e. User Lockout disabled).

LOCKOUT

Sets the user lockout recovery timer (in seconds). This 
timer determines how long a user is locked out when the 
login failure threshold is reached. The range is from 10 to 
86400 seconds. The default is 60 seconds.

AGING

Determines how long (in days) a password is valid. The 
range is from 10 to 360 days; the default is 0 (aging 
disabled).

Remarks None

Related

USERS

RestrictionsNone

Summary of Contents for SDU-2000e



































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands