Symmetricom 5071A, Operating And Programming Manual

Page: 109 / 194

Chapter 5 Command Reference
Description of SCPI Commands
Operating and Programming Manual 81
DIAGnostic:TEMPerature?
This query returns ambient temperature sensed within the instrument in Celsius.
Response format = <NR3>, precision = 0.1 C, accuracy = ± 2.5 C
DIAGnostic:TEST? <numeric_value>
This query executes the diagnostic test specified by the supplied parameter.
The 5071A must be in Standby mode or Fatal error state to successfully execute
this command, otherwise error m203 ―Valid only in standby‖ returns.
Response format = <boolean> (0: tests passed, or 1: tests failed).
The available test parameters and corresponding functions are:
-1. Execute tests 0 through 17
0. Cbt board register test
1. Cbt board thermistor window test
2. Cbt board thermistor test
3. Cbt board Cesium oven test
4. Cbt board hot wire ionizer test
5. Cbt board mass spectrometer test
6. Cpu board RTDS test
7. Cpu board phase lock loop test
8. DDFS board register test
9. DDFS board and 87 MHz module tuning voltage test
10. DDFS board 9.2 GHz module tuning voltage test
11. Servo board register test
12. Servo board DAC time-out test
13. Interface board register test
14. Interface board Analog bus test
15. Pps board register test
16. Pps board interrupt test
17. Power logic check