Symmetricom 5071A, Operating And Programming Manual

Page: 102 / 194

Chapter 5 Command Reference
5071A Command Summary
74 Operating and Programming Manual
Table 5-2. SCPI Command Summary (Continued)
Command Parameter Form Response Form Comment
DIAGnostic :VOLTage:HWIonizer? <NR3> Returns Hot wire ionizer
Volts.
DIAGnostic :VOLTage:MSPec? <NR3> Returns Mass
spectrometer Volts.
DIAGnostic :VOLTage:PLLoop? <NR3,NR3,
NR3,NR3> Returns Phase-Lock
Loop Volts.
DIAGnostic :VOLTage:ROSCillator? <NR3> Returns Quartz OSC
Mon. Volts.
DIAGnostic :VOLTage:SUPPly? <NR3,NR3,
NR3,NR3> Returns Power Supply
Volts.
DISPLAY COMMANDS
DISPlay:ENABle <OFF|0|ON|1> Sets the Clock Display
ON or OFF.
DISPlay:ENABle? <0|1> Returns Clock display
status.
PRECISION TIME (DATE AND TIME) COMMANDS
[SOURce]:PTIMe[:TIME] <hour>,<minute>,
<second> Sets 24-hour time.
[SOURce]:PTIMe[:TIME]? [MIN|MAX,
MIN|MAX,
MIN|MAX] <NR1,NR1,
NR1> Returns 24-hour time.
[SOURce]:PTIMe:MJDate <numeric_value> Sets modified Julian
date (MJD).
[SOURce]:PTIMe:MJDate? [MIN|MAX] <NR1> Returns the MJD.
[SOURce]:PTIMe:LEAPsecond:DURation <numeric_value> Sets Leap second minute
duration.
[SOURce]:PTIMe:LEAPsecond:DURation? [MIN|MAX] <NR1> Returns Leap second
minute duration.
[SOURce]:PTIMe:LEAPsecond:MJDate <numeric_value> Sets MJD for a
scheduled leapsecond
(LPS).
[SOURce]:PTIMe:LEAPsecond:MJDate? [MIN|MAX] <NR1> Returns MJD scheduled
leapsecond (LPS).
[SOURce]:PTIMe:LEAPsecond:[:STATe] <OFF|0|ON|1> Sets or cancels a
scheduled LPS.
[SOURce]:PTIMe:LEAPsecond:[:STATe]? <0|1> Returns status of a
scheduled LPS.
[SOURce]:PTIMe:SLEW <numeric_value> Adjusts clock Epoch.
[SOURce]:PTIMe:SLEW? [MIN|MAX] <NR3> Returns MIN/MAX
acceptable Slew-value.