Symbol MK2200 MicroKiosk, Product Reference Manual

Page: 92 / 278

4 - 10 MK2200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Set the filtering parameters and click Apply Filter to apply the filters in RDM.
Click Clear Filter to remove the filtering parameters.
Filtering Example
In Figure 4-6 , the filter parameter is set to a configuration group called
Technical
to isolate a device used in the
Technical department. When you click Apply Filter , the RDM scans the discovered devices list and filters out
only the devices that fall into that configuration group. Use filters to quickly locate the devices.
Figure 4-6
Symbol Remote Device Manager Filtering
Location Select a device location to display. To set locations, use the
System Configuration feature of RDM or System Menu. See
Identification on page 3-12 .
Address Types Select
Static
to display devices found in
Manage Static IP Address
list (see Managing Static IP Addresses on page 4-21 ), or
Discovered to display all devices not in the Manage Static IP
Address list (see Enabling DHCP on page 4-25 ).
IP Address Enter IP address range to filter devices within the range.
Table 4-3
Filter Parameters Fields (Continued)
Menu Item Function