Symbol MK2200 MicroKiosk, Product Reference Manual

Page: 211 / 278

Appendix C: Rapid Deployment Client C - 3
Scanning RD Bar Codes
When the MK2200 scans and successfully decodes a single or multiple RD bar codes, the data encoded in the
bar code can:
•
Reset the MK2200’s connection profile. A connection profile is a set of Mobile Companion parameters
that the MK2200 uses to access the wireless network.
•
Initiate downloads of one or more software packages from an FTP server to the MK2200.
To scan an RD bar code:
1.
Obtain the appropriate RD bar code(s) from the MSP administrator.
2.
Launch the MK2200’s scan engine by tapping
Start > Programs > System
menu.
3.
With the
System
menu open, from the toolbar, click on
Configuration > Turn Scanner On
. Leave the
System
menu open while using RD Client or the scan engine turns off.
4.
Launch the RD application on the MK2200 by tapping
Start > Programs > Rapid Deployment Client
. The
Rapid Deployment
window displays.
Figure C-2
Rapid Deployment Window
5.
Scan the appropriate bar code(s) to complete the configuration and/or download. For information about
scanning with the MK2200, see
Bar Code Scanning on page 1-8 .
a.
A PDF417 bar code (2D bar code) can contain all download data in a single bar code. In this case, only
one bar code may be required to scan.
b.
Multi-part linear bar codes (1D bar codes) can require scanning several bar codes. Scan bar codes in
any order. The text box under
Bar codes left to scan...
shows the remaining bar codes to scan (see
Figure C-2 ).
NOTE
Currently, RD only recognizes AirBeam version 2.16 software packages.
Ready to Scan
No Bar Codes Left to Scan
Ready to Scan
Bar Codes 1, 10, 11, 12 Left to Scan