Symbol MK2200 MicroKiosk, Product Reference Manual

Page: 253 / 278

Appendix I
Setting Scanner Parameters
Appendix I Setting Scanner Parameters
Overview
This chapter describes the scanning default parameters for the MK2200, useful when developing applications
that control the MK2200 scan engine.
Enabling and Disabling Symbologies
See the following for information on where to find programming examples for enabling and disabling
symbologies.
C API
Refer to the file scan.c in Samples\ EVC\Standard\Common in the SMDK for eVC4. See the functions
ScanEnableDecoder and ScanDisableDecoder , which enable and disable a single symbology using the
scanner C API functions.
ActiveX API (Browser Applications)
Refer to the file scanframe.html in the Web Kiosk Software Suite. See the subroutine SetLaserMode which
enables and disables symbologies based on whether 2D scanning is enabled.
Default Table
Table I-1 lists the default values for the MK2200 SE 3223 Scan Engine. If desired, change these values within
an application, and in the case of HTML (browser) applications, set them independently for each web page.
To change the settings in an application, refer to the MK2000 SMDK for C . See the scanparams sample
application in the SMDK.
For a sample HTML application that includes source code and demonstrates scan engine control, see Chapter
6, Web Kiosk Software Suite .