Symbol MK2200 MicroKiosk, Product Reference Manual

Page: 167 / 278

System Features 8 - 11
RAM: Volatile (Non-Persistent) Memory
The MK2200 has 32 MB of DRAM volatile memory. Developers can automate control of the device’s RAM
(volatile) memory allocation (storage vs. memory used to run programs) to persist memory allocation settings
through cold boot cycles.
Use the Symbol RDM or the System Menu to permanently configure RAM memory allocations (memory used
to run programs).
(
System Configuration > Memory Allocation > SystemStorePercent
).
FTP Server
The MK2200 supports the minimum implementation of the FTP server defined in RFC 959, which includes
configuration values, transfer parameters, and supports only ASCII and image data types.
The FTP server is enabled by default. Use the RDM utility FTP Server feature (
Update/FTP Server
) to set up the
FTP server. See page 3-23 .
FTP Server Registry Parameters
•
Allow Anonymous - This parameter determines whether to provide anonymous access to users for
copying data from MK2200. When enabled, users do not need an account on the local machine.
•
Allow Anonymous Upload - Use this parameter to enable/disable anonymous users to copy data to the
MK2200.
•
FTP Enable Part I - This parameter determines whether the FTP server is loaded/accessible when the
MicroKiosk is powered on. Disabling this does not affect the RDM’s ability to load or retrieve
mkconfig.reg files using the
Push Configuration File
and
Retrieve Remote Configuration File
options
respectively.
•
FTP Enable Part II - Enabling this parameter allows the RDM to load/retrieve a mkconfig.reg file even if
the MicroKiosk FTP server is disabled (FTP Enable Part I = disabled). If both FTP Enable Part I and FTP
Enable Part II parameters are disabled, you cannot load the mkconfig.reg file remotely using the RDM or
FTP. However, you can load the mkconfig.reg file locally using an ActiveSync connection or a PC card.
•
Root Directory - Use this parameter to set the root directory, which could be accessed remotely. If you
do not specify the root directory, the default
\Temp
is set.
•
Use Authentication - Use this parameter to enable/disable authorization to connect to the server. If
enabled, a valid user account on the local machine is required and the correct ID and password for the
account must be specified to the server.
NOTE
The RDM/System Menu can only configure unused RAM.
NOTE
You cannot use FTP to update partitions.
CAUTION Never enable the server in anonymous mode if the MK2200 is accessible from the internet.