Symbol MK2200 MicroKiosk, Product Reference Manual

Page: 234 / 278

F - 10 MK2200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Creating a Splash Screen
The
Splash
screen appears briefly when the device cold boots. To generate a custom
Splash
screen, use a
bitmap editor, such as
Paintbrush
.
Creating a Splash Screen on Color Terminals
1.
Create an 8 or 16-bit color bitmap with dimensions of BX x BY where:
-
BX is less than or equal to 640 pixels
-
BY is less than or equal to 480 pixels
2.
Choose Build , then check at least the
Splash
screen item. Build other partition images if desired. Click OK .
3.
Select the source file for the splash screen (the bitmap created above) on the
File Open
window.
4.
Specify the output filename for the splash screen on the
Save As
file window.
TCM creates the splash screen HEX file and any other HEX files requested.
NOTE
The MK2200 ignores images larger than 640 x 480, in either dimension, or that are not 8 or
16-bit color. Images smaller than 640 x 480 are centered in the display.