5
3.
Intended use
This product is designed to prevent unauthorised access to doors (e.g. in an office) and to activate/disable alarm
systems. Control is possible via suitable transponders or fingerprints. A maximum of 1000 users can be stored (100
fingerprints, 890 user transponders and 10 visitor transponders).
If you hold a taught-in transponder in front of the reading area or touch the sensor with a stored finger, a floating relay
changeover contact is activated (for contact rating, see ‘Technical data’). This can be used, for example, to control a
door opener or an alarm system.
The product is intended for wall mounting and for indoor and outdoor use (IP66).
For safety and approval purposes, do not rebuild and/or modify this product. Using the product for purposes other than
those described above may damage the product. In addition, improper use can cause hazards such as a short circuit,
fire or electric shock. Read the operating instructions carefully and store them in a safe place. Only make this product
available to third parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and product names contained
herein are trademarks of their respective owners. All rights reserved.
4. Delivery content
•
Access system
•
Mounting material (2x special screws with suitable L key, 4x stickers for screw heads, mounting frame with 4x
screws and 4x dowels)
•
Master transponder
•
Diode 1N4004 (for relay changeover contact)
•
IR remote control (with 1x CR2025 lithium-ion battery)
•
Quick Start
•
Overview sheet for programming
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
