23
h) Clearing all memories
All 1000 memories are deleted (890 user transponders, 10 visitor transponders, 99 user fingerprints and
the master fingerprint).
The master transponder and the programmed settings (e.g. the activation time for the changeover contact
or the protection function) are retained.
Proceed as follows:
• Start programming mode as outlined in 8. a) so that the LED flashes red.
•
Enter programming code to start deletion mode. The LED lights up yellow.
•
Enter:
•
Exit deletion mode with the
button. The LED flashes red again. You can now carry out further programming or
exit programming mode with the button.
Example for deleting all 1000 memories (the default master code 123456 is used as an example; you must use your
own master code):
i)
Select access mode
The changeover contact can be activated in 3 different ways:
•
With a transponder or
fingerprint (default setting)
• Only with a fingerprint
•
Only with a transponder
The changeover contact cannot be activated with the master transponder or the master fingerprint.
Proceed as follows:
• Start programming mode as outlined in 8. a) so that the LED flashes red.
•
Enter the programming code for the access mode: The LED lights up yellow.
•
Select the desired access mode:
= with a transponder or fingerprint (default setting)
= only with a fingerprint
= only with a transponder
•
Exit setting mode with the
button. The LED flashes red again. You can now carry out further programming or exit
programming mode with the button.
Example for access via a transponder only (programming mode must be active, see 8. a):
