FITTED EQUIPMENT
171
Opening/closing the
blind and fly net
Pull the end rod from the
recessed part and push
it in a position you
desire. You can adjust
the incidence of light
with the second
operating bar.
Safety precautions
Repairs should be
carried out only by
trained personnel.
Inform an approved
dealer in case of defects and malfunctions.
Before starting off, check the roof light for
damage in the dome (tension cracks) and the
opening mechanism which could arise owing
to, for example, branches and other natural
causes. Do not step on the screen.
Do not leave the vehicle with the roof light open
(danger of burglary and water penetration).
Do not open in strong wind, rain or snowfall.
Before opening, remove snow, ice, dirt etc.
from the dome.
Malfunctions must be repaired by an approved
dealer at once. Do not use caustic detergents
(danger of tension cracks in the dome).
Before setting off close the dome and check
the locking mechanism.
Avoid high speed (maximum speed
recommended is 130 km/h). Do not close the
blind more than 2/3 during the day (danger of
heat build up). Before starting off, Open the
blind.
Care instructions
Clean the dome with the Seitz acrylic cleaner.
Opaque spots and light scratches on the
dome can be removed with the Seitz Acrylic
Polish and the Seitz Special Polishing cloth.
Use talcum powder regulary (4 times yearly) to
care for the rubber seals.
Clean the blinds only with water and mild soap
suds or a vacuum cleaner.
The guarantee becomes null and void
if the care and safety instructions are
not followed.
ROOF LIGHTS
When opening the roof lights, care must be
taken to release the locking mechanism as the
unit is raised.
Roof lights must be fully closed when
driving. Roof lights provide essential fixed
levels of ventilation.
Mini Heki Rooflight
To open depress button and push bar
upwards. The rooflight has two open
ventilation positions and a fully open position.
The blind and flynet operate independently of
each other and are engaged by connecting to
each other and sliding.
Heki care instructions:
Clean the blind only
with a damp sponge. Clean on a regular basis
to avoid dust/ dirt particle build up as this can
damage the blind material. Use only water or
with mild suds or a vacuum cleaner.
In order to avoid material fatigue, do not leave
the flynet closed for a long time.
Summary of Contents for Motorhomes 2013
