Swift Motorhomes 2013, Owner'S Service And Warranty Handbook

Page: 114 / 205

FITTED EQUIPMENT
112
3. From standby mode to setting menu
When on standby, the indoor temperature is
displayed, and the outdoor temperature is
displayed if an outdoor temperature sensor
has been connected. The background lights
up when you press the screen or the MENU
button. Start the setting menu by pressing
the MENU button. The background lights up
and those functions which can be set are
displayed. The settings are automatically saved
after 10 seconds. The control panel reverts to
standby automatically after 30 seconds if no
buttons are pressed (or if the MENU button in
the setting menu is pressed).
1. The control panel in standby.
+22°C
+6°C
Fri 18.30
2. The control panel in setting menu.
4. Set the required temperature
The temperature can be set from +5°C to
+30°C in steps of 0.5°C. Warm water is always
available (50°C) when the boiler is on and
running on LPG or electricity. During summer,
when only warm water is required, adjust the
temperature setting to below the surrounding
temperature so that the central heating pump
does not start.
1. The temperature displayed is the
temperature which is set at present (in this
case 22.0°C).
2. Raise the temperature by pressing the +
button. Lower the temperature by pressing
the – button.
3. The settings are ready and the central
heating pump will work at the set
temperature.
5. Extra warm water
If you need more warm water, you can raise
the water temperature temporarily from 50°C
to 65°C. After 30 minutes, the boiler reverts
to normal operation. When you have selected
more warm water the circulation pump stops.
ALDE 3010 CONTROL PANEL