Swift Motorhomes 2013, Owner'S Service And Warranty Handbook

Page: 158 / 205

FITTED EQUIPMENT
156
EXTRACTOR HOOD
THETFORD C260CS & C260S
CASSETTE TOILET
The toilet is made up of two parts: a
permanently fixed part and a Waste Holding
Tank that is accessible from the outside. The
removable Waste Holding Tank is located
under the toilet bowl and can be removed via a
door on the outside of the motorhome.
PARTS
a) Removable Seat and Lid
b) Swivelling Toilet Bowl
c) Blade Handle
d) Flush Button
e) Waste Holding Tank Level Indicator
f) Rotating Emptying Spout
g) Automatic Pressure Release Vent
h) Sliding Cover
i) Removable Mechanism
j) Vent Plunger
k) Pull-Out Handle
l) Wheels
m) Blade Opener
n) Access Door to Waste Holding Tank
P) Electric blade opener
Q) Electric ventilator
R) Waste pump-out system
S) Waste holding tank mult-level indicator
T) Flush water tank level indicator
f
g
h
i
j
k
l
m
n
Control panel
Preparing for use
1. Open the access door on the outside of
your motorhome.
2. Remove the Waste Holding Tank by pulling
the safety catch (which holds the tank in
place) upwards.
3. Pull the Waste Holding Tank outward to
the stop. Tip it slightly and take the tank
fully out.
4. Place the tank upright and turn the rotating
emptying spout upwards. The emptying
spout ensures that the tank can be easily
and hygienically emptied.
5. Remove the cap, with the measuring
cup inside, from the emptying spout and
pour the correct dosage of Thetford toilet
fluid (see product label) into the holding
tank. This avoids unpleasant smells and
keeps the inside of the tank clean. Next
add approximately 2 litres of water -
enough to ensure that the bottom of the
Waste Holding Tank is covered. For more