Swift Motorhomes 2013, Owner'S Service And Warranty Handbook

Page: 110 / 205

FITTED EQUIPMENT
108
Overheating protection 230 V
The 230 V heating facility has a mechanical
overheating switch. If the 12 V power supply
is interrupted during operation or during the
after-run period, for example, the temperatures
within the unit could activate the overheating
protection.
To reset the overheating protection, allow
heater to cool, remove connection cover and
press red reset button.
Technical data
determined in accordance with EN 624 or
Truma test
Device category
I3 B/P in accordance with EN 437
Type of gas: Liquid gas (propane / butane)
Operating pressure: 30 mbar (see type plate)
Water contents:
10 litres
Heating up time from approx. 15° C to
approx. 60° C
Boiler approx. 20 minutes (measured
according to EN 15033) boiler
approx. 80 min.
Pump pressure: max. 2.8 bar
System pressure:
max. 4.5 bar
Rated thermal output
(automatic output levels)
Gas operation
Combi 2 E UK: 2000 W
Combi 4 E: 2000 W / 4000 W
Electrical operation
Combi 2 E UK / Combi 4 E / 900 W / 1800 W
Mixed operation (gas and electrical)
Combi 2 E UK /
Combi 4 E max. 3800 W
Gas consumption
Combi 2 E UK: 160 g/h
Combi 4 E: 160 – 320 g/h
Readiness-heat power requirement
Combi 2 E UK / Combi 4 E
Gas operation 5.2 g/h
Countries of destination
Combi 2 E UK: only approved in GB
Combi 4 E (see plate type)
TRUMA COMBI