SVP HDT-70, Manual

Page: 175 / 201

175
HDT-70_H.264 High Definition Camera Transmitter
MANUAL V9.0
7.3 Rack Unit Installation
When the unit is installed the transmitter rack unit horizontally, guides
should be used due to the weight of the equipment. Also, the transmitter
has to be well chilled and therefore, some space must be left next to the
sides of the HDT-70 transmitter for ventilation purposes. This is especially
important when the rack unit is installed in a rack case.
7.4 Up-Converter and parabolic antenna installation
The up-converter is installed next to the transmitter antenna. The form that
the antenna is connected to the up-converter input is through mechanical
hook. The up-converter is connected to the HDT-70 transmitter through a
triax cable. For better performance high quality cables and connectors
should be used.
Do not connect wrongly down-converter to the transmitter. In this case, the
down converter doesn’t switch on.
The up-converter is powered by the transmitter by the IF output. So the IF
output should be connected to one IF input of the HD diversity transmitter.
Figure 7.4 Up-Converter
The power supply to the up-converter in the transmitter should be disabled
when the up-converter is being installed.