SVP HDT-70, Manual

Page: 118 / 201

118
HDT-70_H.264 High Definition Camera Transmitter
MANUAL V9.0
Line nº Function
1
Local IP:
In this option it can be set the IP address of the device in case it
is wanted to control the device remotely. So as to change the IP
address first press OK button and then, with the Up and Down
keys select the desired number. So as to change from one
character to another, press Right and Left keys. Press the OK
button so as to save the introduced value. (editable parameter)
2
Subnet Mask:
Here it can be written the Subnet Mask address of the device. So
as to change the Subnet Mask address first press OK button and
then, with the Up and Down keys select the desired number. So
as to change from one character to another, press Right and Left
keys. Press the OK button so as to save the introduced value.
(editable parameter)
3
Gateway:
In this option, the address of the Gateway must be written. So
as to change the Gateway address first press OK button and
then, with the Up and Down keys select the desired number. So
as to change from one character to another, press Right and Left
keys. Press the OK button so as to save the introduced value.
(editable parameter)
4
MAC ADDRESS (Reading parameter)
In this field, the MAC address of the device is shown.
5
Admin Pass:
The administrator’s password is introduced. It can be set an own
password which is a list of 8 digits.
To set the password, press the OK button and then use the Up
and Down buttons to establish the desired value, then press the
Right and Left buttons to change other digits. Finally press OK
button to save the introduced values.