SVP HDT-70, Manual, Page: 136 / 201

136
HDT-70_H.264 High Definition Camera Transmitter
MANUAL V9.0

[A2] Input:
Select the type of signal introduced in the audio 2 input. The audio
input options available are Embedded, Analogue, AES-EBU, Test Tone
Generator and None. (eligible parameter)

[A2] Bitrate:
Select the bitrate for the coding process of the audio 2 signal. The
available options are 128, 192, 256 and 384 Kbps. (eligible
parameter)
 DID:
Here you can choose the group, available options are gruop 1,2,3 or
4.
5.2.1.3 Data

Input:
Select the type of data introduced to the device. The available
options are None, GPS and RS232. (eligible parameter)
5.2.1.3.1 RS-232
Figure 5.10 Remote RS-232 screen
If it is wanted to send data to the transmitter through a RS232 connection,
this option must be selected. It is also needed to configure the next
parameters so as to achieve a successful communication:

Baudrate:
Choose the baudrate of the RS-232 connection. The available options
are 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600. (eligible
parameter)

Parity:
Select the parity for the RS-232 connection. The available options are
None, ODD and Even. (eligible parameter)