SVP HDT-70, Manual

Page: 145 / 201

145
HDT-70_H.264 High Definition Camera Transmitter
MANUAL V9.0

Power:
In this field, the user can select the power at which the signal is being
transmitted, the available options are high (30dBm) and low
(24dBm).

ODU Direct
The direct power transmitted is shown in the screen (dBm).

ODU Reverse
The quantity of reflected power of the transmitted signal is displayed
(%).

Bandwidth:
Enter the transmitted signal bandwidth. The available options are 1.7,
5, 6, 7, 8 MHz. (eligible parameter)

Modulation:
Select the constellation of the transmitted signal. The available
options are QPSK, 16 QAM, 64 QAM, 256 QAM. (eligible parameter)

LDPC FEC:
Select the FEC value for the transmitted signal. The available options
are 1/2, 3/5, 2/3, 3/4, 4/5, 5/6. (eligible parameter)

Mode:
Specify the FFT mode. The available options are 1K, 2K, 4K, 8K,
8K.ext. (eligible parameter)

GI:
Select the guard interval of the transmitted signal. The available
options are 1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128. (eligible
parameter)

Pilot Pattern:
This field indicates the scattered pilot pattern used for the data OFDM
symbols. The available options are between PP1 and PP8. (reading
parameter)

Time Interleaving:
This option indicates the number of time interleaver blocks per
interleaving frame.
The user must select in how many time interleaver blocks (TI_blocks)
an interleaving frame is split. Only the time interleaver mode 0
(TIME_IL_TYPE=0) is supported, so one interleaving frame always
equates to exactly one OFDM frame.