SVP HDT-70, Manual

Page: 137 / 201

137
HDT-70_H.264 High Definition Camera Transmitter
MANUAL V9.0

Stop Bits:
Establish the number of stop bits for the RS-232 connection. The
available options are 1 and 2. (eligible parameter)
5.2.1.3.2 GPS
If GPS data is selected and the GPS antenna is connected to the device,
then different parameters as shown in chapter 4 appear:
Figure 5.11 Remote GPS screen
The format of the GPS coordinates used is decimal minutes as shown in the
next example:
N43º02.032’
W023º03.023’

Status:
The status of the GPS input is displayed in this field. (reading
parameter)

Latitude:
It specifies the latitude position of the transmitter. (reading
parameter)

Longitude:
It specifies the longitude position of the transmitter. (reading
parameter)

Altitude:
The height of the transmitter from ground in meters is specified in
this value. (reading parameter)