SVP HDT-70, Manual

Page: 126 / 201

126
HDT-70_H.264 High Definition Camera Transmitter
MANUAL V9.0
Chapter 4: GPS
4.1 Introduction
The HDT-70 transmitter has a GPS antenna input in order to give
information to the device about the positioning data. Connecting the GPS
antenna to this input, allows the transference of the information given.
Once the information is kept inside the device, it can be sent to the HDR-70
receiver. If the signal arrives correctly to the receiver system, then the
HDR-70 will have all the GPS data available and this receiver device will be
able to calculate the direction, distance, positioning... of the transmitter.
The HDR-70 receiver also includes another feature that consists on an
output RS232 connection which allows watching throughout Google Maps
application the position of the transmitter in real time.
4.2 Main Screen
Next it is explained the value of the data field which appears in the main
screen of the HDT-70 transmitter.
Figure 4.1 Main screen
The data status field indicates with a darkened X that it is disabled. When
this parameter is enabled and blinks, this means that there is nothing
connected to the data input. When this field alternates the value between
‘g’ and ‘G’, it means that it is trying to get the GPS satellites. If the ‘G’ does
not vary, then it is connected to the satellites.
1250,00MHz DVBT
P: +5dBm FFT8K B8
QPSK 3/4 1/16 8.7
HA
u
G
-------- 422L
XXX/XX