SVP HDT-70, Manual, Page: 39 / 201

39
HDT-70_H.264 High Definition Camera Transmitter
MANUAL V9.0
3.4.2 OK Button
This button is used to:

Enter to submenus and change parameters. So as to access to a
submenu, OK button must be pressed. Moreover, in the fields where the

enter symbol appears, by pressing the OK button the user can
change the values of the selected parameter. Besides, so as to save the
introduced value, the OK button must be pressed.

In case of being in the main screen, pressing the OK button the user can
access to the alarms screen where there are different alarms that are
taking place. So as to return to the main screen, the cross button must
be pressed.
Figure 3.12 OK button
3.4.3 Cross Button
This button is used to:

Enter from the equipment main screen to the setup menu and vice
versa.

Exit equipment submenus.

This button allows the user to access to the main screen from the alarms
screen.
Figure 3.13 Cross button
3.4.4 Left and Right Button
These buttons are used to:

Once the parameter to change has been selected, they are used to move
the cursor towards the digit immediately on the left or right and to select
a parameter from different options.
OK
X