Svantek SVAN 979, User Manual

Page: 248 / 377

248
SVAN 979 User Manual - Appendixes
Word
number
Name Comment
4 AlarmEventEmail
bit mask of sent e-mail:
– each bit specifies the sending status of the e-mail for one event (the
lowest bit specifies the e-mail sending status for the first event, the
next one for the second event, and so on)
– set bit indicates that e-mail has been sent
– cleared bit indicates that e-mail has not been sent
– number of available events is defined in the corresponding block of
parameters (see Table B.1.23 )
...
reserved
... 0CDnnh
0CDh = block end identifier
0nnh = block length in words
Table B.2.12. Blocks for reserved markers
Word
number
Name Comment
0 0C7kkh
0C7kkh = block start identifier (0kkh is an additional number from 0
to 127 identifying the block)
1 0nnnnh
block length in words
2..
reserved
... 0nnnnh
block length in words
... 0CFkkh
0CFkkh = block end identifier (0kkh is an additional number from 0 to
127 identifying the block)
B.3. D
ESCRIPTION OF CYCLICAL RESULTS BLOCKS
(S
UMMARY
R
ESULTS
)
Table B.3.1. Block of counters
Word
number
Name Comment
0 0nn59h
59h = block identifier
0nnh = block length in words
1..2 CycleNo
measurement cycle number
… reserved
Table B.3.2. Block of Summary Results
Word
number
Name Comment
0 0nn07h
07h = block identifier
0nnh = block length in words
1 00pxxh
p = number of profiles, 0xxh = profile bit mask (the bit mask indicates
for which profiles the results are available)