Svantek SVAN 979, User Manual

Page: 230 / 377

230
SVAN 979 User Manual - Appendixes
7 FirmwareBetaSubVer
additional internal software upgrade number for Beta version;
number is relevant only if the internal software upgrade is zero; for
example, Beta version is 3.21.06
8 FirmwareDate
internal software date
9 FileSysVersion
version number of the result files system; for example, 321 means
version 3.21
… reserved
Table B.1.4. Information about calibration
Word
number
Name Comment
0 0nn47h
47h = block identifier
0nnh = block length in words
1 PreCalibrType
calibration type:
0
– no calibration
1
– calibration
By Measurement
2
– calibration
By Sensitivity
3
– factory calibration
2 PreCalibrDate
date of the calibration “Pre" (parameter important only for the
performed calibration)
3 PreCalibrTime
hour of the calibration “Pre" (parameter important only for the
performed calibration)
4 PreCalibrFactor
calibration “Pre" factor in 0.01 dB format (parameter important only
for the performed calibration)
… reserved
Table B.1.5.
User’s text
Word
number
Name Comment
0 0nn03h
03h = block identifier,
0nnh = block length in words
1.. TitleText
comment text; ASCII character row (terminated by zero byte)
Table B.1.6. Information about the instrument name
Word
number
Name Comment
0 0nn58h
58h = block identifier
0nnh = block length in words
1 UnitNameID instrument name identifier (text "UN")
2.. UnitName
ASCII character row (terminated by zero byte) specifying the
instrument name
… reserved
Table B.1.7. Measurement parameters
Word
number
Name Comment
0 0nn04h
04h = block identifier
0nnh = block length in words