Svantek SVAN 979, User Manual

Page: 236 / 377

236
SVAN 979 User Manual - Appendixes
Word
number
Name Comment
4 Source
triggering source (parameter relevant only for alarm pulse function in
digital output mode):
0
– triggering by RMS/Leq level from the first profile
1
– triggering by the Peak level from the first profile
2
– triggering by max level from the first profile
3
– triggering by P-P/Spl level from the first profile mode
5 SourceType
triggering type (parameter relevant only for alarm pulse function in
digital output mode)):
0
– triggering condition checked every second (
Current )
1
– triggering condition checked after the end of the
measurement cycle (
Periodic )
6 AlarmLevel
triggering threshold value in 0.01 dB format (parameter relevant only
to alarm function in digital output mode)
7 Polarisation/Slope
polarity of external triggering pulse (parameter relevant only to
instantaneous triggering pulse function):
0
– positive polarity
1
– negative polarity
active slope of external triggering pulse (essential for out-of-range
performance):
0
– active positive slope
1
– active negative slope
… reserved
Table B.1.13. Main block of profile parameters
Word
number
Name Comment
0 0nn05h
05h = block identifier
0nnh = block length in words
1 00nxxh
n = number of profiles, 0xxh = profile bit mask (bit mask informs which
parameter profiles are available)
2.. Profile[1]
inner block with identifier 06h containing parameters of the first profile
(if the first profile bit mask is set)
– see
Table B.1.14
... ...
...
... Profile[n]
inner block with identifier 06h containing parameters of the last profile
(if the bit mask of the last profile is set)
– see
Table B.1.14
… reserved