Suzuki VITARA Series, Owner'S Manual

Page: 177 / 482

3-37
OPERATING YOUR VEHICLE
54P00-01E
NOTE:
• When turning off the engine, the previ-
ously set distance in the memory is can-
celed and the system is initialized.
• An appropriate following distance will
vary depending on vehicle speed.
Changing speed temporarily
When the cruising speed is maintained,
you can temporarily accelerate or deceler-
ate.
To accelerate, depress the accelerator
pedal. When you take your foot off the
pedal, your vehicle will return to the set
speed.
To decelerate, depress the brake pedal.
The set speed will be canceled and “SET”
indicator (8) will disappear. To resume the
previously set speed, push “RES +” switch
(4) and turn on “SET” indicator (8) again
when vehicle speed is above about 40 km/
h (25 mph). The vehicle will accelerate to
the previously set speed and maintain its
speed.
Changing cruising speed
Using the accelerator pedal
To reset at a faster cruising speed, acceler-
ate to the desired speed using the accelera-
tor pedal and push “SET –” switch (5). The
new speed will be maintained.
Using the brake pedal
To reset at a slower cruising speed, decel-
erate to the desired speed using the brake
pedal and push “SET –” switch (5). The
new speed will be maintained.
NOTE:
When the brake pedal is depressed, “SET”
indicator (8) disappears until you reset the
cruising speed.
Using “RES +” switch or “SET –” switch
To reset at a faster cruising speed, press
repeatedly or hold push “RES +” switch
(4). Vehicle speed will steadily increase.
When you release the switch, the new
speed will be maintained.
To reset at a slower cruising speed, press
repeatedly or hold push “SET –” switch (5)
until the vehicle has slowed to the desired
speed, and then release the switch. The
new speed will be maintained.