Suzuki LT-Z400, Service Manual

Page: 47 / 492

Maintenance and Lubrication: 0B-21
Check that the rear axle nut is tightened to it specified
torque.
If the specified torque is lower than specification, tighten
the rear axle nut and lock-nut as follows.
Special tool
(A): 09940–92460 (Rear axle nut wrench set)
Tightening torque
Rear axle nut (a): 240 N·m (24.0 kgf-m, 173.5 lb-ft)
Rear axle lock-nut (b): 240 N·m (24.0 kgf-m, 173.5
lb-ft)
1) Loosen the rear axle lock-nut (1) and rear axle nut
(2) with the special tool by applying the rear brake.
Special tool
(A): 09940–92460 (Rear axle nut wrench
set)
2) Remove the rear axle lock-nut (1).
3) Push the rear axle nut bolt (3).
4) Move the stopper ring (4) and tighten the rear axle
nut (2).
5) Apply thread lock to the rear axle nut bolt (3).
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
6) Loosen the rear axle nut (2).
7) Fit the stopper ring (4).
8) Tighten the rear axle nut (2) to the specified torque
with the special tool. Refer to “Rear Axle Nut and
Lock-Nut Tightening Torque in Section 3A (Page 3A-
7)”.
Special tool
(A): 09940–92460 (Rear axle nut wrench
set)
Tightening torque
Rear axle nut (a): 240 N·m (24.0 kgf-m, 173.5 lb-
ft)
9) Tighten the rear axle lock-nut (1) to the specified
torque with the special tool. Refer to “Rear Axle Nut
and Lock-Nut Tightening Torque in Section 3A
(Page 3A-7)”.
Special tool
(A): 09940–92460 (Rear axle nut wrench
set)
Tightening torque
Rear axle lock-nut (b): 240 N·m (24.0 kgf-m,
173.5 lb-ft)
(a)
(b)
(A)
I933H1020055-02
(A)
1
2
I933H1310009-01
4
2
3
I933H1020056-03
4
(A)
(a)
2
2
3
I933H1020057-02
(b)
1
(A)
I933H1020058-03
PartShark.com
877-999-5686