Suzuki LT-Z400, Service Manual

Page: 294 / 492

1K-4 Exhaust System:
• Install the new muffler connector (2).
NOTE
When installing new connector, remove the
old sealer from the exhaust pipe and muffler.
Apply the exhaust gas sealer to both the
inside and outside of the new connector.
: Muffler seal (MUFFLER SEAL LOCTITE
5920 (commercially available) or equivalent)
• Tighten the muffler mounting pipe bolts (3) and muffler
connecting bolt (4) to the specified torque.
Tightening torque
Muffler mounting bolt (b): 23 N·m (2.3 kgf-m, 16.5
lb-ft)
Muffler connecting bolt (c): 23 N·m (2.3 kgf-m,
16.5 lb-ft)
Exhaust System Inspection
B933H21B06003
Inspect the exhaust pipe connection and muffler
connection for exhaust gas leakage and mounting
condition. If any defect are found, replace the exhaust
pipe assembly or muffler with a new one.
Check the exhaust pipe nuts (1), muffler connecting bolt
(2) and muffler mounting bolts (3) are tightened to their
specified torque.
Tightening torque
Exhaust pipe nut (a): 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Muffler connecting bolt (b): 23 N·m (2.3 kgf-m, 16.5
lb-ft)
Muffler mounting bolt (c): 23 N·m (2.3 kgf-m, 16.5 lb-
ft)
Spark Arrester Inspection
B933H21B06004
Refer to “Spark Arrester Cleaning in Section 0B
(Page 0B-10)”.
2
I933H11B0007-01
(b)
3
I933H11B0008-04
(c)
4
I933H11B0009-02
(a)
1
(b)
2
I933H11B0010-01
(c)
3
I933H11B0011-01
PartShark.com
877-999-5686