2-65
BEFORE DRIVING
79MH0-74E
Selector position (for automatic
transaxle) / Gearshift indicator (if
equipped)
68PM00255
Selector position
When the ignition switch is in “ON” position
or engine switch is pressed to change the
ignition mode to “ON”, the display (D) indi-
cates the gear position (j).
For details on how to use the transaxle,
refer to “Using transaxle” in the “OPERAT-
ING YOUR VEHICLE” section.
Gearshift indicator
Refer to “Gearshift indicator” in the
“OPERATING YOUR VEHICLE” section.
Trip meter
The display (E) shows the trip meter.
The trip meter can be used to measure the
distance traveled on short trips or between
fuel stops.
You can use trip meter A or trip meter B
independently.
To reset the trip meter to zero, push and
hold the trip meter selector knob (3) for
about 2 seconds when the display shows
the trip meter.
Odometer
The display (F) shows the odometer.
The odometer records the total distance
the vehicle has been driven.
Setting mode
When the ignition switch is in “ON” position
or ignition mode is “ON” and the vehicle is
stationary, you can enter the setting mode
of the information display by pushing and
holding the indicator selector knob (2) for
more than 3 seconds.
• To select the setting that you want to
change, turn the indicator selector knob
(2) left or right.
• To change the setting, push the indicator
selector knob (2).
• To exit the setting mode, select “Back”
and push the indicator selector knob (2).
68PM00256
NOTE:
The currently selected setting item is sur-
rounded by a frame.
NOTE:
• If you push and hold the indicator selec-
tor knob (2) to enter the setting mode
when the display (C) shows average fuel
consumption, average speed, driving
time, total idling stop time and total idling
fuel save, the value will be reset simulta-
neously. If you do not want to reset the
value, push the indicator selector knob
quickly to switch the indication of the dis-
play.
• If you turn the ignition switch, press the
engine switch or start to move the vehi-
cle when the display is in the setting
mode, the setting mode will be canceled
automatically.
(j)
EXAMPLE
NOTICE
Keep track of your odometer reading
and check the maintenance sched-
ule regularly for required services.
Increased wear or damage to certain
parts can result from failure to per-
form required services at the proper
mileage intervals.
EXAMPLE
