3-6
79MH0-74E
Engine Switch Illumination
The engine switch is illuminated (lit) in the
following situations:
• When the engine is not running and the
driver’s door is open, or for 15 seconds
after the driver’s door is closed. The illu-
mination will fade out after the 15 sec-
onds past.
• When the engine is not running and the
position lights are on. The illumination
will go out when the position lights are
turned off.
• When the engine is running and the
position lights and/or the headlights are
on. The illumination will go out when the
headlights and position lights are turned
off.
82K253
NOTE:
To save the battery, the illumination will be
automatically turned off when both of the
following conditions are simultaneously
met:
• The headlights and position lights are
turned off.
• A period of 15 minutes has elapsed after
opening the driver’s door.
Selection of Ignition Modes
Press the engine switch to select the
“ACC” or “ON” mode as follows when you
use an electric accessory or check the
operation of instruments without running
the engine.
1) Bring the keyless push start system
remote controller with you and sit in the
driver’s seat.
2) Manual transaxle – Without depressing
the clutch pedal, press the engine
switch (1).
Automatic transaxle – Without depress-
ing the brake pedal, press the engine
switch (1).
82K254
Every time you press the engine switch,
the ignition mode changes as follows.
57L31006
79MM03032
NOTE:
Automatic transaxle – If the gearshift lever
is in any position other than “P”, or if the
knob button is pushed when the gearshift
lever is in “P” position the ignition mode
cannot be returned to “LOCK” (OFF).
EXAMPLE
(1)
(1)
EXAMPLE
P
P
(OFF)
ON
ACC
LOCK
(Audio equipment)
Gearshift lever in a
position other than
Gearshift
lever in
(OFF)
ON
P
P
ACC
LOCK
(Audio equipment)
Gearshift lever in a
position other than
Gearshift
lever in
Automatic transaxle
(OFF)
ON
ACC
LOCK
(Audio equipment)
Manual transaxle
