2-32
BEFORE DRIVING
79MH0-74E
Installation of Child Restraint with
Top Strap
79MH0241
Some child restraint systems require the
use of a top strap. Top strap anchor brack-
ets are provided in your vehicle at the loca-
tions shown in the illustrations. The
number of the anchor bracket provided in
your vehicle depends on the vehicle speci-
fication.
Install the child restraint system as follows:
1) Raise the head restraint (if equipped) to
the uppermost position.
2) Secure the child restraint on the rear
seat using the procedure described
above for securing a restraint system
that does not require a top strap.
3) Open the cover that is marked with the
anchor bracket symbol to access the
anchor bracket. Close the cover when
not using the anchor bracket.
4) Hook the top strap to the anchor
bracket and tighten the top strap
according to the instructions provided
by the child restraint system manufac-
turer. Be sure to attach the top strap to
the corresponding anchor located
directly behind the child restraint. Do
not attach the top strap to the luggage
restraint loops.
79MH0242
5) Check that the seat is securely
attached after fitment of child restraint.
6) Install the head restraint, then pass the
top strap under the head restraint as
shown in the illustration. (Refer to
“Head Restraints” section for details on
how to raise or lower the head
restraint.)
NOTE:
Maruti Suzuki recommends use of Maruti
Suzuki Genuine accessory of “Child seat,
ISOFIX”.
EXAMPLE
WARNING
Do not attach the child restraint top
strap to the luggage restraint loops
Incorrectly attached top strap will
reduce the intended effectiveness of
the child restraint system.
EXAMPLE
