Suzuki CIAZ Owner'S Manual Download Page 300

Page: 300 / 324

8-1

EMERGENCY SERVICE

79MH0-74E

Tire Changing Tool

79MM08001

The jack, wheel wrench and jack handle are stowed in the luggage compartment.

NOTE:

• Hang the luggage carpet (1) with help of string (3) in the hook (4) before removing the

spare tire (5).

• Remove the luggage box (2) before spare tire removal and while refitment place spare tire

first and then put luggage box.

(4)

(2)

(5)

(3)

(1)

EXAMPLE

80J048

To remove the spare tire (if equipped), turn

its bolt (1) counterclockwise and remove it.

WARNING

After using the tire changing tools, be

sure to stow them securely or they

can cause injury if an accident

occurs.

CAUTION

The jack should be used only to

change wheels. It is important to read

the jacking instructions in this section

before attempting to use the jack.

(1)

EXAMPLE

Summary of Contents for CIAZ





































































































































































































































































































































Search results

Summary of Contents for CIAZ

Reviews:

Related manuals for CIAZ

Brands by name

Popular brands

Suzuki CIAZ, Owner'S Manual

Search results

Summary of Contents for CIAZ

Reviews:

Related manuals for CIAZ

Brands by name

Popular brands