7-9
79MH0-74E
4) Using a wrench, remove the drain plug
and drain out the engine oil.
60G306
Tightening torque for drain plug
Petrol engine:
35 Nm (3.6 kg-m, 25.8 lb-ft)
Diesel engine :
20 Nm (2.0 kg-m, 14.8 lb-ft)
5) Reinstall the drain plug and gasket.
Tighten the plug with a wrench to the
specified torque.
Replace the Oil Filter
(For Petrol Engine Model)
1) Using an oil filter wrench, turn the oil fil-
ter counterclockwise and remove it.
2) Using a clean rag, wipe off the mount-
ing surface on the engine where the
new filter will be seated.
3) Smear a small amount of engine oil
around the rubber gasket of the new oil
filter.
4) Screw the new filter by hand until the fil-
ter gasket contacts the mounting sur-
face.
54G092
(1) Loosen
(2) Tighten
CAUTION
The engine oil temperature may be
high enough to burn your fingers
when the drain plug is loosened. Wait
until the drain plug is cool enough to
touch with your bare hands.
EXAMPLE
WARNING
• Engine oil can be hazardous. Chil-
dren and pets may be harmed by
swallowing new or used oil. Keep
new and used oil and used oil fil-
ters away from children and pets.
• Repeated, prolonged contact with
used engine oil may cause skin
cancer.
• Brief contact with used oil may irri-
tate skin.
• To minimize your exposure to used
oil, wear a long-sleeve shirt and
moisture-proof gloves (such as
dish-washing gloves) when chang-
ing oil. If oil contacts your skin,
wash thoroughly with soap and
water.
• Launder any clothing or rags if wet
with oil.
• Recycle or properly dispose of
used oil and filters.
(1)
(2)
EXAMPLE
