Suzuki CIAZ Owner'S Manual Download Page 253

Page: 253 / 324

5-70

OTHER CONTROLS AND EQUIPMENT

79MH0-74E

iPod

operations

TUNE

VOL -

VOL +

FLD

TUNE

MODE

SOUND

FLD

ENT

SEEK

TRACK

SEEK

TRACK

RPT

RDM

MENU

DISP

While displaying iPod

menu, press to select the

desired item and display the list. When a track is

selected from the list, the playback starts.

ENT button

The random mode switches as follows:

RDM (5) button

OFF

SONG RANDOM

ALBUM RANDOM

Press to play the current track repeatedly.

Press it again to cancel.

RPT (4) button

The display switches as follows:

Press it for 1 second or longer to display the next

page.

DISP (6) button

Playlist name /

Track title (Playlist mode only)

Artist name / Track title

Album name / Track title

Track title / Play time

During

playback

• Press to display iPod

menu.

• Press it for 1 second or longer to display the top menu.

While

iPod

menu is displayed

• Press to display the folder in one layer upper.

• Press it for 1 second or longer to display the top menu.

MENU button

While displaying iPod

menu, press to dis-

play the next/previous list in the same layer.

TUNE FOLDER UP/DOWN button

Press to skip to the next/previous file.

Press it for 1 second or longer to fast-forward/fast-

rewind the file.

SEEK TRACK UP/DOWN button

Summary of Contents for CIAZ





































































































































































































































































































































Search results

Summary of Contents for CIAZ

Reviews:

Related manuals for CIAZ

Brands by name

Popular brands

Suzuki CIAZ, Owner'S Manual

Search results

Summary of Contents for CIAZ

Reviews:

Related manuals for CIAZ

Brands by name

Popular brands