Suzuki CIAZ Owner'S Manual Download Page 249

Page: 249 / 324

5-66

OTHER CONTROLS AND EQUIPMENT

79MH0-74E

Radio operations

TUNE

VOL -

VOL +

FLD

TUNE

MODE

SOUND

FLD

ENT

SEEK

TRACK

SEEK

TRACK

RPT

RDM

MENU

DISP

NOTE:

When there are fewer than 6 stations that can be stored even if 1 round of auto store operation is performed, no station will be

stored at the remaining preset buttons.

Press to return to the last received fre-

quency in the previous auto store mode.

Press it for 2 seconds or longer. It selects

the stations with the stronger signals and

stores them in order.

AS button

Press to select the radio station.

SEEK TRACK UP/DOWN button

Press to select the desired preset station.

PRESET buttons (1-6)

Summary of Contents for CIAZ





































































































































































































































































































































Search results

Summary of Contents for CIAZ

Reviews:

Related manuals for CIAZ

Brands by name

Popular brands

Suzuki CIAZ, Owner'S Manual

Search results

Summary of Contents for CIAZ

Reviews:

Related manuals for CIAZ

Brands by name

Popular brands