2-14
BEFORE DRIVING
79MH0-74E
NOTE:
• The default setting of the shock sensor
is in the disabled state. Set to the
enabled state and adjust sensitivity of
each warning according to your prefer-
ence. For details on how to use the infor-
mation display, refer to “Information
Display” in this section.
• Your dealer may have already set the
shock sensor of the vehicle to the
enabled state before you purchase it.
Consult your dealer for further informa-
tion.
NOTE:
• The security system generates alarms
when any of the predetermined condi-
tions is met. However, the system does
not have any function of blocking unau-
thorised entry into the vehicle.
• Always use the keyless entry system
transmitter or keyless push start system
remote controller to unlock the doors when
the security system has been armed.
Using a key instead will trigger the alarm.
• If a person who does not know the secu-
rity system is going to drive the vehicle,
we recommend you explain the system
and its operation to the person.
• Even if the security system is armed,
you should still be careful to guard
against theft. Do not leave money or
things of value in the vehicle.
How to arm the security system
Lock all doors (including engine hood and
trunk lid) using the keyless entry system
transmitter or keyless push start system
remote controller.
when the system is armed, the indicator
continues to blink at intervals of approxi-
mately 2 seconds.
79MH0210
NOTE:
• To prevent the alarm from being acci-
dentally triggered, avoid arming it while
anyone remains inside the vehicle. The
alarm will be triggered if any person
inside opens the door, trunk, engine
hood, or the warning may be triggered if
anyone swings the vehicle (if the shock
sensor is in the enabled state).
• The security system is not armed when
all doors are locked using the key from
outside, using the door lock knobs or the
central door locking switch from inside.
• If any door is not operated within approx-
imately 30 seconds after the doors have
been unlocked using the keyless entry
system transmitter or keyless push start
system remote controller, the doors are
automatically locked again. When the
doors are locked, the security system
will be armed.
• If the security system indicator (1) blinks
when the ignition switch is in the “ON”
position or the ignition mode is “ON”,
there may be something wrong with the
security system. Ask your authorised
Maruti Suzuki workshop to inspect the
system.
How to disarm the security system
Simply unlock the doors using the keyless
entry system transmitter or keyless push
start system remote controller. The secu-
rity system indicator will go out, indicating
that the security system is disarmed.
How to stop the alarm
Should the alarm be triggered accidentally,
the alarm will stop by the following opera-
tions.
• Press the engine switch to change the
ignition mode to “ON” or turn the ignition
switch to “ON” position.
• Unlock the doors using the keyless push
start system remote controller, the
request switch, or the keyless entry sys-
tem transmitter.
(1)
EXAMPLE
