Suzuki Burgman AN400, Service Manual

Page: 66 / 475

1A-3 Engine General Information and Diagnosis:
The possible cause of this indication is as follows:
Engine stop switch is in OFF position. Side-Stand/ignition inter-lock system is not working. Ignition fuse is burnt.
Dealer Mode
CAUTION
!
Before checking the malfunction code, do not disconnect the ECM coupler.
If the coupler from the ECM is disconnected, the malfunction code memory is erased and the
malfunction code can not be checked.
The defective function is memorized in the computer. Use the special tool’s coupler to connect to the dealer mode
coupler (A). The memorized malfunction code is displayed on LCD (DISPLAY) panel. Malfunction means that the ECM
does not receive signal from the devices. These affected devices are indicated in the code form.
Special tool
(A): 09930–82720 (Mode select switch)
Malfunction LCD (Display) Indication FI Light Indication Indication Mode
“NO” C00
FI light turns OFF.
—
“YES”
C** code is indicated from
small numeral to large one. For each 2 sec., code is
indicated.
(A)
I705H1110111-01 I705H1110112-01
(A)
I705H1110114-01