Suzuki Burgman AN400, Service Manual

Page: 245 / 475

Fuel System: 1G-15
Specifications
Service Data
B705H11707002
In Fuel Pump + Fuel Pressure Regulator
Fuel
Tightening Torque Specifications
B705H11707003
NOTE
The specified tightening torque is also described in the following.
“Fuel Tank Hose Construction (Page1G-2)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications in Section
0C (Page0C-7)”.
Item Specification Note
Injector resistance Approx. 10.3
Ω
at 20
°
C (68 F
°
) —
Fuel pump discharge amount
35 ml and more
For 10 sec., at 300 kPa (3.0 kgf/cm 2 , 43 psi)
—
Fuel pressure regulator operating
set pressure
Approx. 300 kPa (3.0 kgf/cm 2 , 43 psi) —
Item Specification Note
Fuel type
Use only unleaded gasoline of at least 87 pump octane or 91
octane (R/2 + M/2) or higher rated by the research method.
Gasoline containing MTBE (Methyl Tertiary Butyl Ether), less
than 10% ethanol, or less than 5% methanol with
appropriate cosolvents and corrosion inhibitor is permissible.
E-03, 28, 33
Gasoline used should be graded 91 octane or higher. An
unleaded gasoline type is recommended. The others
countries
Fuel tank capacity Including reserve 13.5 L (3.6/3.0 US/lmp gal)
Reserve 4.0 L (3.17/2.64 US/lmp gal)
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lb-ft
Fuel cut valve bolt 3.5 0.35 2.5 ) (Page1G-7)
Fuel pump mounting bolt
10 1.0 7.0
) (Page1G-9) /
) (Page1G-11)
Fuel hose mounting bolt 10 1.0 7.0 ) (Page1G-9)